The design utilizes wire ropes in conjunction with two hydraulic jacks to lift the elevator at a 1:2 ratio. For each foot the jack rises, the elevator rises two feet.
Advantages:
- Jack hole is not required. Eliminating the cost of drilling and the risk of ground contamination from oil leak.
- Offered in both low and high capacity elevators.
- Accommodates front and rear opening configurations.
- Available with higher travels up to approximately 90’-0”.
- Minimal pit and overhead requirements.
Disadvantages:
- May require a larger hoistway width to accommodate jacks mounted on either side of the platform.
- Governor access door is required in the overhead unless a special governor is provided.
- Side openings are not an option.
- Material cost and installation time is typically higher when compared to an in-ground application.
AutoCad drawings (.dwg files) are in a zipped folder and will need to be unzipped once downloaded.
Passenger Dual Roped – Front Open Only
| Type | Capacity (lbs) | Hoistway
Width x Depth |
Platform
Width x Depth |
Inside Cab
Width x Depth |
Door Type | Door Width | Travel Max | AutoCAD | |
| Passenger | |||||||||
| 2000 | 7′-6″ x 5′-10″ | 6′-0″ x 5′-1″ | 5′-8″ x 4′-3″ | Single Speed | 3′-0″ | 45′ | .dwg | ||
| 2000 | 7′-8″ x 5′-10″ | 6′-0″ x 5′-1″ | 5′-8″ x 4′-3″ | Single Speed | 3′-0″ | 70′ | .dwg | ||
| 2500 | 8′-6″ x 5′-10″ | 7′-0″ x 5′-1″ | 6′-8″ x 4′-3″ | Single Speed | 3′-6″ | 40′ | .dwg | ||
| 2500 | 8′-8″ x 5′-10″ | 7′-0″ x 5′-1″ | 6′-8″ x 4′-3″ | Single Speed | 3′-6″ | 65′ | .dwg | ||
| 3000 | 8′-8″ x 6′-3″ | 7′-0″ x 5′-6″ | 6′-8″ x 4′-8″ | Single Speed | 3′-6″ | 65′ | .dwg | ||
| 3500 | 8′-8″ x 6′-11″ | 7′-0″ x 6′-2″ | 6′-8″ x 5′-4″ | Single Speed | 3′-6″ | 60′ | .dwg | ||
| 4000 | 9′-8″ x 6′-11″ | 8′-0″ x 6′-2″ | 7′-8″ x 5′-4″ | Single Speed | 4′-0″ | 55′ | .dwg | ||
| 4000 | 10′-0″ x 6′-11″ | 8′-0″ x 6′-2″ | 7′-8″ x 5′-4″ | Single Speed | 4′-0″ | 85′ | .dwg | ||
| Hospital | |||||||||
| 4000 | 8′-0″ x 9′-6″ | 6′-0″ x 8′-8″ | 5′-8″ x 7′-8 1/2″ | Two Speed | 4′-0″ | 90′ | .dwg | ||
| 4500 | 8′-0″ x 9′-11″ | 6′-0″ x 9′-1″ | 5′-8″ x 8′-1 1/2″ | Two Speed | 4′-0″ | 85′ | .dwg | ||
| 5000 | 8′-4″ x 10′-5″ | 6′-0″ x 9′-7″ | 5′-8″ x 8′-7 1/2″ | Two Speed | 4′-6″ | 85′ | .dwg |
Passenger Dual Roped – Front & Rear Open
| Type | Capacity (lbs) | Hoistway
Width x Depth |
Platform
Width x Depth |
Inside Cab
Width x Depth |
Door Type | Door Width | Travel Max | AutoCAD | |
| Passenger | |||||||||
| 2000 | 7′-6″ x 6′-9 1/2″ | 6′-0″ x 5′-9″ | 5′-8″ x 4′-4 3/4″ | Single Speed | 3′-0″ | 45′ | .dwg | ||
| 2000 | 7′-8″ x 6′-9 1/2″ | 6′-0″ x 5′-9″ | 5′-8″ x 4′-4 3/4″ | Single Speed | 3′-0″ | 70′ | .dwg | ||
| 2500 | 8′-6″ x 6′-9 1/2″ | 7′-0″ x 5′-9″ | 6′-8″ x 4′-4 3/4″ | Single Speed | 3′-6″ | 40′ | .dwg | ||
| 2500 | 8′-8″ x 6′-9 1/2″ | 7′-0″ x 5′-9″ | 6′-8″ x 4′-4 3/4″ | Single Speed | 3′-6″ | 65′ | .dwg | ||
| 3000 | 8′-8″ x 7′-1 1/2″ | 7′-0″ x 6′-1″ | 6′-8″ x 4′-8 3/4″ | Single Speed | 3′-6″ | 65′ | .dwg | ||
| 3500 | 8′-8″ x 7′-9 1/2″ | 7′-0″ x 6′-9″ | 6′-8″ x 5′-4 3/4″ | Single Speed | 3′-6″ | 60′ | .dwg | ||
| 3500 Stag. Open. | 8′-8″ x 7′-9 1/2″ | 7′-0″ x 6′-9″ | 6′-8″ x 5′-4 3/4″ | Side Slide | 3′-6″ | 60′ | .dwg | ||
| 4000 | 9′-8″ x 7′-8 1/2″ | 8′-0″ x 6′-8″ | 7′-8″ x 5′-4 3/4″ | Single Speed | 4′-0″ | 55′ | .dwg | ||
| 4000 | 10′-0″ x 7′-8 1/2″ | 8′-0″ x 6′-8″ | 7′-8″ x 5′-4 3/4″ | Single Speed | 4′-0″ | 85′ | .dwg | ||
| Hospital | |||||||||
| 4000 | 8′-0″ x 10′-7 1/2″ | 6′-0″ x 9′-4″ | 5′-8″ x 7′-8 3/4″ | Two Speed | 4′-0″ | 90′ | .dwg | ||
| 4500 | 8′-0″ x 11′-0 1/2″ | 6′-0″ x 9′-9″ | 5′-8″ x 8′-1 3/4″ | Two Speed | 4′-0″ | 85′ | .dwg | ||
| 5000 | 8′-4″ x 11′-6 1/2″ | 6′-0″ x 10′-3″ | 5′-8″ x 8′-7 3/4″ | Two Speed | 4′-6″ | 85′ | .dwg |
Additional Specs
Pit Depth = 4′-0″
Standard Cab Height = 8′-0″
Speed available to 150 FPM
Minimum Overhead ≤ 100 FPM = 12′-1″
Minimum Overhead > 150 FPM = 12′-4″
Notes for Dual Roped
- Hoistway widths and depths can be reduced by 1″ if conditions require and hoistway plumbness is maintained.
- All elevators shown here comply with NEII and ADA space requirements for wheel chair access.
- 2000-lb. elevators must have single-slide doors to meet NEII and ADA requirements for wheelchair access.
- 2500, 3000 & 3500-lbs. elevators shown here comply with NEII and ADA requirements for ambulance stretcher access, unless equipped with center-parting doors.
This information is intended for preliminary planning. We have attempted to include the basic data that you will require in your planning efforts. For details about specific or custom installations please contact your local Canton Elevator representative, or contact us directly.
