The design utilizes two hydraulic single stage jacks, located on each side of the platform and installed directly on the pit floor.

Advantages:

  • Jack hole is not required. Eliminating the cost of drilling and the risk of ground contamination from oil leak.
  • Offered in both low and high capacity elevators.
  • Accommodates front and rear opening configurations.

Disadvantages:

  • May require a larger hoistway width to accommodate jacks mounted on either side of the platform.
  • Limited to approximately 16’-0” of travel.
  • Side openings are not an option.
  • Material cost is typically higher when compared to an in-ground application.
AutoCad drawings (.dwg files) are in a zipped folder and will need to be unzipped once downloaded.

Passenger Dual Holeless Single Stage Hydraulic – Front Open Only

Type Capacity (lbs) Hoistway

Width x Depth

 Platform

Width x Depth

 Inside Cab

Width x Depth

 Door Type Door Width PDF AutoCAD
Passenger
2000 7′-4″ x 5′-10″ 6′-0″ x 5′-1″ 5′-8″ x 4′-3″ Single Speed 3′-0″ .pdf .dwg
2500 8′-4″ x 5′-10″ 7′-0″ x 5′-1″ 6′-8″ x 4′-3″ Single Speed 3′-6″ .pdf .dwg
2500 8′-4″ x 5′-10″ 7′-0″ x 5′-1″ 6′-8″ x 4′-3″ Center Open 3′-6″ .pdf .dwg
3000 8′-4″ x 6′-3″ 7′-0″ x 5′-6″ 6′-8″ x 4′-8″ Single Speed 3′-6″ .pdf .dwg
3000 8′-4″ x 6′-3″ 7′-0″ x 5′-6″ 6′-8″ x 4′-8″ Center Open 3′-6″ .pdf .dwg
3500 8′-4″ x 6′-11″ 7′-0″ x 6′-2″ 6′-8″ x 5′-4″ Single Speed 3′-6″ .pdf .dwg
3500 8′-4″ x 6′-11″ 7′-0″ x 6′-2″ 6′-8″ x 5′-4″ Center Open 3′-6″ .pdf .dwg
4000 9′-9″ x 6′-11″ 8′-0″ x 6′-2″ 7′-8″ x 5′-4″ Single Speed 4′-0″ .pdf .dwg
4000 9′-9″ x 6′-11″ 8′-0″ x 6′-2″ 7′-8″ x 5′-4″ Center Open 4′-0″ .pdf .dwg
Hospital
4000 7′-9″ x 9′-6″ 6′-0″ x 8′-8″ 5′-8″ x 7′-8 1/2″ Two Speed 4′-0″ .pdf .dwg
4500 7′-9″ x 9′-11″ 6′-0″ x 9′-1″ 5′-8″ x 8′-1 1/2″ Two Speed 4′-0″ .pdf .dwg
5000 8′-3″ x 10′-5″ 6′-0″ x 9′-7″ 5′-8″ x 8′-7 1/2″ Two Speed 4′-6″ .pdf .dwg

Passenger Dual Holeless Single Stage Hydraulic – Front & Rear Open

Type Capacity (lbs) Hoistway

Width x Depth

 Platform

Width x Depth

 Inside Cab

Width x Depth

 Door Type Door Width PDF AutoCad
Passenger
2000 7′-4″ x 6′-9 1/2″ 6′-0″ x 5′-9″ 5′-8″ x 4′-4 3/4″ Single Speed 3′-0″ .pdf .dwg
2500 8′-4″ x 6′-9 1/2″ 7′-0″ x 5′-9″ 6′-8″ x 4′-4 3/4″ Single Speed 3′-6″ .pdf .dwg
2500 8′-4″ x 6′-9 1/2″ 7′-0″ x 5′-9″ 6′-8″ x 4′-4 3/4″ Center Open 3′-6″ .pdf .dwg
3000 8′-4″ x 7′-1 1/2″ 7′-0″ x 6′-1″ 6′-8″ x 4′-8 3/4″ Single Speed 3′-6″ .pdf .dwg
3000 8′-4″ x 7′-1 1/2″ 7′-0″ x 6′-1″ 6′-8″ x 4′-8 3/4″ Center Open 3′-6″ .pdf .dwg
3500 8′-4″ x 7′-9 1/2″ 7′-0″ x 6′-9″ 6′-8″ x 5′-4 3/4″ Single Speed 3′-6″ .pdf .dwg
3500 Stag. Open. 8′-4″ x 7′-9 1/2″ 7′-0″ x 6′-9″ 6′-8″ x 5′-4 3/4″ Side Slide 3′-6″ .pdf .dwg
3500 8′-4″ x 7′-9 1/2″ 7′-0″ x 6′-9″ 6′-8″ x 5′-4 3/4″ Center Open 3′-6″ .pdf .dwg
4000 9′-4″ x 7′-9 1/2″ 8′-0″ x 6′-9″ 7′-8″ x 5′-4 3/4″ Single Speed 4′-0″ .pdf .dwg
4000 9′-4″ x 7′-9 1/2″ 8′-0″ x 6′-9″ 7′-8″ x 5′-4 3/4″ Center Open 4′-0″ .pdf .dwg
Hospital
4000 7′-4″ x 10′-7 1/2″ 6′-0″ x 9′-4″ 5′-8″ x 7′-8 3/4″ Two Speed 4′-0″ .pdf .dwg
4500 7′-4″ x 11′-0 1/2″ 6′-0″ x 9′-9″ 5′-8″ x 8′-1 3/4″ Two Speed 4′-0″ .pdf .dwg
5000 8′-2″ x 11′-6 1/2″ 6′-0″ x 10′-3″ 5′-8″ x 8′-7 3/4″ Two Speed 4′-6″ .pdf .dwg

Additional Specs

Pit Depth = 4′-0″
Standard Cab Height = 8′-0″
Speed available to 150 FPM
Consult factory for overhead requirements

Notes for Dual Holeless

  • 2000-lb. car complies with NEII recommendations for car to accommodate wheelchair.
  • 2500-lb. and larger cars comply with NEII recommendations for car to accommodate
    24″ x 76″
    stretcher when equipped with single slide doors.
  • 3500-lb. and larger cars comply with NEII recommendations for car to accommodate
    24″ x 84″
    stretcher when equipped with single slide doors.
Warning

This information is intended for preliminary planning. We have attempted to include the basic data that you will require in your planning efforts. For details about specific or custom installations please contact your local Canton Elevator representative, or contact us directly.