The design utilizes a hydraulic single stage jack and is installed directly on the pit floor. The platform is supported by a cantilevered car frame with the jack and rails located on one side of the hoistway.

Advantages:

  • Jack hole is not required. Eliminating the cost of drilling and the risk of ground contamination from oil leak.
  • Accommodates front, rear and side opening configurations.
  • Allows for glass walls on sides where equipment is not located.
  • Rail bracket attachment only required on one wall of the hoistway.

Disadvantages:

  • May require a larger hoistway width to accommodate rail and jack equipment being mounted on only one side of the car or at the rear.
  • Additional rail force considerations are necessary to accommodate rail brackets being mounted only on one wall.
  • Limited to approximately 16’-0” of travel.
  • Limited to 3000-lb. capacity rating.
AutoCad drawings (.dwg files) are in a zipped folder and will need to be unzipped once downloaded.

 

Passenger Cantilever Holeless

Type Capacity (lbs) Hoistway


Width x Depth

Platform


Width x Depth

Inside Cab


Width x Depth

Front / Side Door Type Door Width PDF AutoCAD
Passenger
2000 7′-4″ x 6′-10″ 6′-0″ x 5′-1″ 5′-8″ x 4′-3″ Front Single Speed 3′-0″ .pdf .dwg
2000 8′-0″ x 6′-10″ 6′-8″ x 5′-1″ 5′-8 3/8″ x 4′-2 7/8″ Front / Side 1 Speed & 2 Speed 3′-0″ .pdf .dwg
2500 8′-4″ x 6′-10″ 7′-0″ x 5′-1″ 6′-8″ x 4′-3″ Front Single Speed 3′-6″ .pdf .dwg
2500 9′-0″ x 6′-10″ 7′-8″ x 5′-1″ 6′-8 3/8″ x 4′-2 7/8″ Front / Side 1 Speed & 2 Speed 3′-6″ .pdf .dwg
3000 8′-4″ x 7′-3″ 7′-0″ x 5′-6″ 6′-8″ x 4′-8″ Front Single Speed 3′-6″ .pdf .dwg
3000 9′-0″ x 7′-3″ 7′-8″ x 5′-6″ 6′-8 3/8″ x 4′-7 7/8″ Front / Side 1 Speed & 2 Speed 3′-6″ .pdf .dwg

Additional Specs

Pit Depth = 4′-0″
Standard Cab Height = 8′-0″
Speed available to 150 FPM
Consult factory for overhead requirements

Notes for Cantilever Holeless

  • 2000-lb. car complies with NEII recommendations for car to accommodate wheelchair.
  • 2500-lb. and larger cars comply with NEII recommendations for car to accommodate ambulance size stretcher when equipped with single slide doors.
Warning

This information is intended for preliminary planning. We have attempted to include the basic data that you will require in your planning efforts. For details about specific or custom installations please contact your local Canton Elevator representative, or contact us directly.