Traditional design utilizing a hydraulic jack, which is located directly under the platform and installed in the ground.

Advantages:

  • Generally the least expensive and easiest to install.
  • Offered in both low and high capacity elevators.
  • Accommodates front and rear opening configurations.
  • Minimal pit and overhead requirements.

Disadvantages:

  • The jack must be buried into the ground roughly the same distance as the overall travel. Drilling a hole can be expensive and difficult depending on ground water and bedrock.
  • Possible ground contamination from oil leak (sealed PVC recommended to prevent contamination).

Freight In-Ground Hydraulic

Loading Capacity (lbs) Hoistway


Width x Depth

Platform


Width x Depth

Inside Cab


Width x Depth

Door


Width x Height

Front / Rear Pit Depth PDF AutoCAD
Class A 4000 9′-0″ x 9′-4″ 7′-0″ x 8′-6″ 6′-8″ x 7′-11″ 6′-8″ x 7′-0″ Front 4′-6″ .pdf .dwg
4000 9′-0″ x 9′-4″ 7′-0″ x 8′-6″ 6′-8″ x 7′-9″ 6′-8″ x 7′-0″ Front / Rear 4′-6″ .pdf .dwg
5000 10′-0″ x 9′-10″ 8′-0″ x 9′-0″ 7′-8″ x 8′-5″ 7′-8″ x 7′-0″ Front 4′-6″ .pdf .dwg
5000 10′-0″ x 9′-10″ 8′-0″ x 9′-0″ 7′-8″ x 8′-3″ 7′-8″ x 7′-0″ Front / Rear 4′-6″ .pdf .dwg
6000 10′-4″ x 10′-10″ 8′-4″ x 10′-0″ 8′-0″ x 9′-5″ 8′-0″ x 7′-0″ Front 4′-6″ .pdf .dwg
6000 10′-4″ x 10′-10″ 8′-4″ x 10′-0″ 8′-0″ x 9′-3″ 8′-0″ x 7′-0″ Front / Rear 4′-6″ .pdf .dwg
8000 10′-6″ x 12′-10″ 8′-4″ x 12′-0″ 8′-0″ x 11′-5″ 8′-0″ x 7′-0″ Front 4′-6″ .pdf .dwg
8000 10′-6″ x 12′-10″ 8′-4″ x 12′-0″ 8′-0″ x 11′-3″ 8′-0″ x 7′-0″ Front / Rear 4′-6″ .pdf .dwg
10000 12′-8″ x 14′-10″ 10′-4″ x 14′-0″ 10′-0″ x 13′-5″ 10′-0″ x 7′-0″ Front 4′-6″ .pdf .dwg
10000 12′-8″ x 14′-10″ 10′-4″ x 14′-0″ 10′-0″ x 13′-3″ 10′-0″ x 7′-0″ Front / Rear 4′-6″ .pdf .dwg
Class B 8000 10′-6″ x 22′-6″ 8′-4″ x 21′-8″ 8′-0″ x 21′-1″ 8′-0″ x 8′-0″ Front 4′-6″ .pdf .dwg
8000 10′-6″ x 22′-6″ 8′-4″ x 21′-8″ 8′-0″ x 20′-11″ 8′-0″ x 8′-0″ Front / Rear 4′-6″ .pdf .dwg
Class C 8000 10′-6″ x 12′-10″ 8′-4″ x 12′-0″ 8′-0″ x 11′-5″ 8′-0″ x 7′-0″ Front 4′-6″ .pdf .dwg
8000 10′-6″ x 12′-10″ 8′-4″ x 12′-0″ 8′-0″ x 11′-3″ 8′-0″ x 7′-0″ Front / Rear 4′-6″ .pdf .dwg
10000 12′-8″ x 14′-10″ 10′-4″ x 14′-0″ 10′-0″ x 13′-5″ 10′-0″ x 7′-0″ Front 4′-6″ .pdf .dwg
10000 12′-8″ x 14′-10″ 10′-4″ x 14′-0″ 10′-0″ x 13′-3″ 10′-0″ x 7′-0″ Front / Rear 4′-6″ .pdf .dwg

Additional Specs

Hole Depth = Travel + 6′-0″
Speed available to 150 FPM
Minimum Overhead = (Door Height x 1.5) + 9″
Warning

This information is intended for preliminary planning. We have attempted to include the basic data that you will require in your planning efforts. For details about specific or custom installations please contact your local Canton Elevator representative, or contact us directly.