The design utilizes two hydraulic single stage jacks, located on each side of the platform and installed directly on the pit floor.

Advantages:

  • Jack hole is not required. Eliminating the cost of drilling and the risk of ground contamination from oil leak.
  • Offered in both low and high capacity elevators.
  • Accommodates front and rear opening configurations.

Disadvantages:

  • May require a larger hoistway width to accommodate jacks mounted on either side of the platform.
  • Limited to approximately 16’-0” of travel.
  • Side openings are not an option.
  • Material cost is typically higher when compared to an in-ground application.

 

Freight Dual Holeless Single Stage Hydraulic

Loading Capacity (lbs) Hoistway


Width x Depth

Platform


Width x Depth

Inside Cab


Width x Depth

Door


Width x Height

Front / Rear Pit Depth
Class A 4000 9′-0″ x 8′-10″ 7′-0″ x 8′-0″ 6′-8″ x 7′-5″ 6′-8″ x 7′-0″ Front 4′-6″
4000 9′-0″ x 8′-10″ 7′-0″ x 8′-0″ 6′-8″ x 7′-3″ 6′-8″ x 7′-0″ Front / Rear 4′-6″
5000 10′-2″ x 9′-10″ 8′-0″ x 9′-0″ 7′-8″ x 8′-5″ 7′-8″ x 7′-0″ Front 4′-6″
5000 10′-2″ x 9′-10″ 8′-0″ x 9′-0″ 7′-8″ x 8′-3″ 7′-8″ x 7′-0″ Front / Rear 4′-6″
6000 10′-6″ x 10′-10″ 8′-4″ x 10′-0″ 8′-0″ x 9′-5″ 8′-0″ x 7′-0″ Front 4′-6″
6000 10′-6″ x 10′-10″ 8′-4″ x 10′-0″ 8′-0″ x 9′-3″ 8′-0″ x 7′-0″ Front / Rear 4′-6″
8000 10′-8″ x 12′-10″ 8′-4″ x 12′-0″ 8′-0″ x 11′-5″ 8′-0″ x 7′-0″ Front 4′-6″
8000 10′-8″ x 12′-10″ 8′-4″ x 12′-0″ 8′-0″ x 11′-3″ 8′-0″ x 7′-0″ Front / Rear 4′-6″
10000 12′-8″ x 14′-10″ 10′-4″ x 14′-0″ 10′-0″ x 13′-5″ 10′-0″ x 7′-0″ Front 4′-6″
10000 12′-8″ x 14′-10″ 10′-4″ x 14′-0″ 10′-0″ x 13′-3″ 10′-0″ x 7′-0″ Front / Rear 4′-6″
Class B 8000 10′-10″ x 22′-6″ 8′-4″ x 21′-8″ 8′-0″ x 21′-1″ 8′-8″ Front 4′-6″
8000 10′-10″ x 22′-6″ 8′-4″ x 21′-8″ 8′-0″ x 20′-11″ 8′-8″ Front / Rear 4′-6″
Class C 8000 10′-8″ x 12′-10″ 8′-4″ x 12′-0″ 8′-0″ x 11′-5″ 8′-0″ x 7′-0″ Front 4′-6″
8000 10′-8″ x 12′-10″ 8′-4″ x 12′-0″ 8′-0″ x 11′-3″ 8′-0″ x 7′-0″ Front / Rear 4′-6″
10000 12′-8″ x 14′-10″ 10′-4″ x 14′-0″ 10′-0″ x 13′-5″ 10′-0″ x 7′-0″ Front 4′-6″
10000 12′-8″ x 14′-10″ 10′-4″ x 14′-0″ 10′-0″ x 13′-3″ 10′-0″ x 7′-0″ Front / Rear 4′-6″

Additional Specs

Speed available to 150 FPM
Minimum Overhead = (Door Height x 1.5) + 9″
Warning

This information is intended for preliminary planning. We have attempted to include the basic data that you will require in your planning efforts. For details about specific or custom installations please contact your local Canton Elevator representative, or contact us directly.